Appliance Installation Contractors
Installation and hookup of kitchen and laundry appliances — ranges, dishwashers, over-the-range microwaves, washers and dryers.
1
Contractor Available
0
Projects This Month
Free
For Homeowners
About appliance installation services
Appliance installation covers the safe hook-up and setup of major household equipment, from refrigerators and dishwashers to gas and electric ranges, over-the-range microwaves, washers, dryers and built-in wall ovens. A qualified installer does far more than slide a unit into place. They connect water lines, drains, gas or electric supply, level and secure the appliance, check for leaks, and run a full test cycle. The goal is an appliance that runs quietly, drains properly and meets manufacturer specifications so your warranty is not voided by a do-it-yourself connection.
Homeowners usually hire an appliance installer when they buy new equipment, remodel a kitchen or laundry room, or replace a unit that has failed. Retailer delivery crews often drop and go without connecting anything, and gas or water hookups legally require care. If you are converting from electric to gas, moving a laundry pair to a new location, or fitting a counter-depth or built-in model into tight cabinetry, professional help prevents flooding, gas leaks and cabinet damage. Many people also call an installer to haul away and disconnect the old appliance.
Because installation quality varies widely between handypeople, licensed trades and retailer subcontractors, it pays to compare several quotes before you book. Ask each contractor exactly what is included: disconnection of the old unit, new supply lines and fittings, levelling, testing, and haul-away. A slightly higher quote that covers a new braided water line, a proper anti-tip bracket or a gas leak test can be the better value. Gathering multiple estimates helps you understand fair labour rates in your area and spot who is cutting corners on parts.
Appliance Installation services we cover
Kitchen appliance installation
Fitting and connecting refrigerators, dishwashers, ranges, cooktops, wall ovens and range hoods, including water lines for ice makers, drain hookups and levelling into cabinet openings for a flush, built-in look.
Gas appliance hookup
Connecting gas ranges, cooktops and dryers to the supply line, checking fittings for leaks with a proper test, and confirming the correct orifice for natural gas or propane where a conversion is needed.
Laundry pair setup
Installing washers and dryers, connecting hot and cold hoses, drain standpipes and venting, levelling to reduce vibration, and stacking or side-by-side arrangements in closets and utility rooms.
Built-in and panel-ready units
Precise fitting of integrated dishwashers, built-in wall ovens, warming drawers and cabinet-front panels that must align exactly with surrounding millwork and door faces.
Old appliance disconnect and haul-away
Safely disconnecting and removing your existing unit, capping or shutting off supply lines, and taking the old appliance away for recycling or disposal so your space is ready for the new one.
Water line and shut-off work
Running new supply lines to refrigerators and dishwashers, adding or replacing shut-off valves, and swapping brittle plastic tubing for braided stainless lines that resist bursting.
Signs you need a appliance installation pro
Retailer will only deliver
Your store crew drops the appliance at the door but will not connect gas, water or venting, leaving a heavy unit and open supply lines you should not tackle alone.
Switching fuel or moving location
You are converting a range from electric to gas, or relocating a laundry pair, which means new lines, venting or electrical that call for a qualified trade.
Tight or built-in fit
The new counter-depth fridge, slide-in range or integrated dishwasher must sit flush in existing cabinetry, and small alignment errors will show or block the doors.
Leaks or vibration after a swap
A recently installed appliance drips at the connection, rocks and walks across the floor, or drains poorly, all signs the levelling or hookup was not done correctly.
What drives appliance installation cost
See the full cost guide →Appliance type and connections
A simple plug-in fridge is quick, while gas ranges, built-in ovens and dishwashers needing water, drain and electrical work take more time, more parts and more skill, raising the labour involved.
New parts and supply lines
Braided water lines, gas connectors, dryer vent kits, shut-off valves and anti-tip brackets add to the total, especially when old fittings are corroded and must be replaced.
Site modifications
Trimming cabinets, adding an outlet, extending a gas line, or cutting a new vent path all add labour and sometimes a second trade such as an electrician or plumber.
Removal and number of units
Disconnecting and hauling away old appliances, and installing several units in one visit, changes the scope. Bundled installs during a kitchen or laundry project often lower the per-unit rate.
Top Appliance Installation Contractors
View All
Concord, Ontario
Toronto's trusted renovation experts since 2009, kitchens, baths, basements & full home remodels across the GTA.
Appliance installation in Canada
Canada is a big market for appliance installation, and it is anything but uniform. Canadian winters put real stress on a home, so materials and installation here are chosen to handle frost, snow load and freeze-thaw cycles.
Common appliance installation work ranges from water line and shut-off work to built-in and panel-ready units. Requirements vary by province and municipality, and many jobs need a permit, so a local contractor who knows the regional code saves headaches.
NeedReno lists appliance installation contractors in provinces across Canada, so you can compare a few local quotes in Canadian dollars and hire someone who knows your area, using Canadian spelling and standards.
How to choose a appliance installation contractor
Look for an installer who works with your appliance type every day and understands manufacturer requirements, because an incorrect hookup can void the factory warranty. For any gas connection, confirm the person is licensed to work on gas, since gas fitting is a regulated trade across Canada and a leak is a serious safety risk. Ask whether they carry liability insurance, provide new connectors rather than reusing old ones, and perform a leak or drain test before they leave. A good installer will explain what they are connecting and show you the appliance running through a cycle.
Compare quotes on scope, not just the bottom line. One estimate may include a new braided line, an anti-tip bracket, disconnection of the old unit and haul-away, while a cheaper one covers only the physical placement. Read recent reviews that mention clean, leak-free installations and on-time arrival. Confirm the installer will register or preserve your warranty paperwork and clean up packaging. Getting several detailed estimates on NeedReno lets you weigh price against the parts and testing each contractor promises, so you avoid callbacks and water damage later.
What to expect from a appliance installation project
Measure and confirm fit
Before delivery the installer verifies the opening dimensions, doorway clearances and available water, gas and electrical connections so the new appliance actually fits and can be hooked up.
Disconnect the old unit
They shut off water, gas or power, disconnect and remove the existing appliance, and inspect the supply lines and valves for corrosion or damage that should be replaced.
Position and connect
The new unit is moved into place, connected to water, drain, gas or electrical, and fitted with fresh lines, vents or brackets as needed for a secure, code-appropriate hookup.
Level and secure
The appliance is levelled to prevent vibration and drainage problems, anti-tip or mounting hardware is added, and integrated units are aligned with surrounding cabinetry.
Test and hand over
The installer runs a cycle, checks for leaks and proper drainage or venting, cleans up packaging, hauls away the old unit and walks you through basic operation.
Appliance Installation: frequently asked questions
How much does appliance installation cost?
Installation pricing depends on the appliance type, the connections required and any site changes. A simple plug-in fridge is quick, while a gas range, built-in oven or dishwasher needing water and drain work takes longer and more parts. Removal of the old unit and new supply lines also affect the total. Comparing several detailed quotes is the best way to see fair local rates.
Do I need a professional for gas appliance installation?
Yes. Connecting a gas range, cooktop or dryer should be done by someone licensed to work on gas, which is a regulated trade in Canada. A professional checks the fittings for leaks, confirms the correct setup for natural gas or propane, and ensures venting is safe. An improper gas connection is a serious fire and health hazard, so this is not a job to attempt yourself.
Can you install a dishwasher where there was none before?
Often yes, but it requires a water supply line, a drain connection and a power source near the cabinet opening, plus a cabinet space of the right width. If those connections are not present, the installer may need a plumber or electrician to add them, and a cabinet may need modifying. Ask for an on-site assessment so the quote reflects the real scope.
Will the store not install the appliance I bought?
Many retailers only deliver and place the appliance, and their crews will not connect gas, water or venting or haul away the old unit. Reading the fine print of a delivery service usually reveals what is excluded. Hiring an independent installer ensures the connections, levelling and testing are handled properly and your manufacturer warranty is not put at risk.
Does professional installation protect my warranty?
It can. Many manufacturers require that gas, water and built-in connections be completed to their specifications, and an incorrect do-it-yourself hookup can void coverage. A qualified installer follows those requirements, uses approved connectors and can preserve your paperwork. Keep the receipt and any registration details, and ask the installer to confirm the appliance was set up to the maker's instructions.
Can an installer remove and haul away my old appliance?
Most appliance installers offer disconnection and haul-away of the old unit, either included or as an add-on. They shut off the supply, safely disconnect it, cap the lines and take the appliance for recycling or disposal. Mention this when you request quotes so removal is priced in, and confirm whether there is an extra fee for units in basements or upper floors.
Ready to Start Your Appliance Installation Project?
Tell us about your project and we'll connect you with verified Appliance Installation professionals near you, for free.