Skip to main content

Garage Doors Contractors

1 verified in this trade

Garage door and opener installation, repair and replacement.

1

Contractor Available

0

Projects This Month

Free

For Homeowners

About garage doors services

The garage door is the largest and heaviest moving object most people own, and it cycles thousands of times a year in every kind of Canadian weather. When it works, nobody thinks about it. When a spring snaps, a cable frays, or the opener dies on a cold morning, the whole household feels it, and the failure often traps a vehicle inside. Garage door repair is one of the most searched home services in the country precisely because these systems are under enormous tension and take real abuse from freeze-thaw cycles, road salt, and daily use. Getting the right technician quickly matters for both convenience and safety.

Most calls fall into a handful of categories. Broken torsion or extension springs are the single most common failure, because springs are wear items rated for a set number of cycles. Openers wear out or lose their logic boards, sensors fall out of alignment, cables jump off the drum, and doors come off their tracks after a bump from a bumper. Rollers seize, hinges rust, and weatherstripping cracks and lets in drafts and snow. Some of these are quick fixes, while others, especially anything involving a spring under load, are genuinely dangerous for an untrained homeowner to attempt. That tension is stored energy, and it does not forgive mistakes.

Beyond repairs, garage door companies install new doors and openers, which is where the biggest gains in insulation, quiet operation, and curb appeal come from. A modern insulated steel door with nylon rollers and a belt-drive opener runs far quieter and holds heat far better than the rattling, uninsulated door it replaces, and it can meaningfully cut the chill in an attached garage. NeedReno connects you with garage door technicians who repair every major brand, replace springs and openers safely, and install new doors sized and rated for your climate.

Garage Doors services we cover

Spring replacement

Replacing broken torsion or extension springs, the most common and most dangerous garage door failure, with springs correctly sized and cycle-rated for the weight of your door so it balances and lifts properly.

Opener repair and installation

Diagnosing dead or intermittent openers, replacing logic boards, motors, and gears, realigning safety sensors, or installing a new chain-, belt-, or screw-drive opener with modern remotes and app control.

Off-track and cable repair

Re-seating doors that have jumped their tracks, replacing frayed or snapped lift cables, and straightening bent tracks so the door runs smoothly and does not bind or jam mid-travel.

New door installation

Supplying and installing insulated steel, aluminum, or wood-look doors sized to your opening, including new tracks, springs, rollers, and weatherstripping, with the old door hauled away.

Roller, hinge, and weatherseal service

Swapping worn rollers for quiet nylon ones, replacing rusted hinges, and installing fresh bottom seals and side weatherstripping to keep out drafts, snow, and small pests.

Tune-ups and safety checks

Lubricating, balancing, and inspecting the full system, testing the auto-reverse and photo-eye safety features, and catching worn springs or cables before they fail and strand your vehicle.

Signs you need a garage doors pro

!

The door will not open or reverses

A door that refuses to lift, or that starts up then drops back down, usually points to a broken spring, a snapped cable, or misaligned safety sensors. Do not force it, because that can worsen the damage.

!

Loud banging or grinding

A sudden loud bang from the garage is often a torsion spring breaking. Ongoing grinding or scraping usually means worn rollers, dry hinges, or a track problem that will get worse if ignored.

!

The door is crooked or off its track

If one side hangs lower than the other or the door has visibly jumped its track, stop using it immediately. A door under spring tension that is off-track can fall, and it needs professional attention.

!

The opener runs but the door barely moves

When the motor hums but the door struggles, the opener may be fine while a spring has lost tension or a cable has slipped. Balance and spring issues put strain on the opener and should be fixed promptly.

What drives garage doors cost

See the full cost guide →

Type of repair or part

A single roller or seal is inexpensive, while a matched pair of torsion springs, a new opener, or a bent track costs more. Spring and cable work also carries a labour premium because of the tension involved.

Door size and material

For new installs, a single door costs far less than a double, and insulated steel, glass, or wood-look designs each carry different price points. Heavier doors also need stronger, pricier springs.

Opener drive and features

A basic chain-drive opener is the low end, while quiet belt-drive units, battery backup, camera integration, and smartphone control add cost. Battery backup is required by code in some jurisdictions.

Emergency and after-hours calls

Same-day, evening, or weekend service to free a trapped vehicle usually costs more than a scheduled visit. Where possible, booking a standard appointment keeps the labour rate lower.

Top Garage Doors Contractors

View All
A Renovation
4.6 (5 reviews)

Concord, Ontario

Toronto's trusted renovation experts since 2009, kitchens, baths, basements & full home remodels across the GTA.

Garage doors in Canada

Homeowners looking for garage doors in Canada rarely face identical conditions. With long winters across much of the country, work in Canada has to account for frost heave, ice and the swing between deep cold and summer heat.

Typical jobs include new door installation and opener repair and installation. Because code and permitting are set provincially and locally, the right pro is one who already works in your area.

Use NeedReno to reach garage doors contractors in your province, get quotes in Canadian dollars, and hire locally with Canadian spelling and standards.

How to choose a garage doors contractor

Garage door work, especially spring and cable service, involves stored energy that can cause serious injury, so this is one trade where hiring a trained technician is a genuine safety decision rather than just a convenience. Look for a company that carries liability insurance and workers' compensation coverage, and that sends technicians experienced with your door's system, whether it uses torsion or extension springs. In several provinces a licensed electrician may be required for certain hardwired opener work, so ask how they handle electrical connections. Reputable installers also honour the manufacturer's warranty on new doors and openers, which a handyman fix can void.

Get the quote in writing and make sure it specifies parts as well as labour, including the cycle rating of any springs, because a higher-cycle spring lasts far longer even though it costs a little more up front. Ask whether they replace springs in matched pairs, since replacing only one on a two-spring door often means the second fails soon after. Check that they test the auto-reverse and photo-eye safety features before leaving, as these are required safety systems on modern openers. Finally, confirm they haul away your old door and honour a labour warranty on the repair, so you are covered if the same issue recurs.

What to expect from a garage doors project

1

Diagnosis and quote

The technician inspects the door, springs, cables, tracks, and opener, identifies the actual failure rather than guessing, and gives you a written price for the repair or replacement before starting.

2

Securing the door

For any spring or cable work, the technician safely releases and controls the stored tension, a step that makes this job dangerous for untrained hands, before removing the failed component.

3

Repair or installation

Worn parts are replaced with correctly sized components, or a new door and tracks are installed level and plumb, with rollers, hinges, and weatherseal fitted so the door runs quietly and true.

4

Balancing and adjustment

The technician sets spring tension so the door holds at the halfway point, adjusts the opener's travel and force limits, and aligns the safety sensors so the system operates smoothly and safely.

5

Safety test and cleanup

Before leaving, they run the door through several full cycles, confirm the auto-reverse trips correctly, lubricate the moving parts, and remove the old door or parts from your property.

Garage Doors: frequently asked questions

How much does it cost to repair a garage door spring?

Spring replacement is a mid-range repair whose cost depends on whether you have one spring or two and the cycle rating you choose. Higher-cycle springs cost a little more but last much longer. Because the job involves dangerous stored tension and specialized tools, most of the price is skilled labour, and technicians usually recommend replacing both springs on a two-spring door at once.

Why did my garage door spring break?

Springs are wear items rated for a set number of open-close cycles, and they simply reach the end of that life with normal use. Canadian winters accelerate it, because cold steel becomes brittle and a spring is most likely to snap on a frigid morning. Rust from humidity and lack of lubrication also shortens spring life, which is why annual maintenance helps them last longer.

Can I replace a garage door spring myself?

It is strongly discouraged. Torsion and extension springs store enormous energy, and a spring or winding bar that slips can cause severe injury. Homeowners are seriously hurt doing this every year. The specialized winding bars, the correct spring sizing, and the safe release of tension are all things a trained technician handles routinely, so this is a repair worth paying a professional to do.

Why won't my garage door opener close the door?

The most common cause is misaligned or blocked photo-eye safety sensors near the floor, which stop the door from closing on an obstruction. Check that both sensor lights are steady and that nothing blocks the beam. If the sensors are clear and aligned and it still will not close, the opener's logic board, limit settings, or wiring may need a technician's attention.

How long does a garage door opener last?

A quality opener typically lasts well over a decade with occasional maintenance, though the exact life depends on how many times a day it runs and the climate. Belt-drive units tend to outlast older chain-drives and run much more quietly. When an opener starts failing intermittently, losing remote sync, or straining, it is usually more economical to replace it than to keep repairing it.

Are insulated garage doors worth it?

For an attached garage, or a detached one you heat or use as a workshop, an insulated door is usually worth it. It holds heat far better, reduces drafts, makes an adjoining room warmer, and runs quieter thanks to its solid construction. For a purely detached, unheated garage used only for parking, the insulation benefit is smaller, so weigh it against the price difference.

Ready to Start Your Garage Doors Project?

Tell us about your project and we'll connect you with verified Garage Doors professionals near you, for free.