Windows & Doors Contractors
Find verified Windows & Doors professionals near you and get free quotes.
2
Contractors Available
0
Projects This Month
Free
For Homeowners
About windows & doors services
Windows and exterior doors are your home's boundary against the weather, and in a country with long winters and real summer heat they do serious work. When they fail, you feel it as cold drafts, condensation between the panes, rooms that never quite hold their temperature, and a furnace that runs harder than it should. Replacing aging units with modern, well-installed windows and doors is one of the most noticeable comfort upgrades a homeowner can make, and it pays back through lower energy bills for as long as you own the house.
The single most searched topic in this category is window replacement, and it covers a lot of ground: full-frame replacement that removes everything down to the rough opening, insert or retrofit replacement that fits new units into sound existing frames, and everything from front picture windows to basement egress. Exterior doors belong in the same conversation because a leaky entry, patio, or garage-access door undermines the same envelope your new windows are meant to seal. Treating windows and doors as one system, installed and flashed the same careful way, is how you get a home that stays comfortable and dry.
Installation quality matters as much as the product you buy. A premium triple-pane window fitted into an out-of-square opening with poor flashing and gappy insulation will underperform a mid-range unit installed correctly. Water management is the make-or-break detail, because a window that leaks even slightly will rot the surrounding structure over years without warning. A skilled installer levels and shims the unit, seals it against air and water with the right membranes and low-expansion foam, and finishes the interior and exterior trim so the whole assembly works together for decades.
Windows & Doors services we cover
Full-frame window replacement
Removing the entire window down to the rough opening lets the installer inspect for hidden rot, re-flash properly, and fit new units precisely, the best choice when existing frames are damaged or drafty.
Insert or retrofit replacement
Fitting new windows into structurally sound existing frames preserves interior and exterior trim, reduces disruption, and works well when the surrounding frame and sill are still solid.
Entry and exterior door installation
Steel, fibreglass, and wood entry doors installed and weathersealed for security and efficiency, including sidelights, transoms, and multipoint locking hardware for a tight, durable seal.
Patio and garden doors
Sliding and swinging patio doors that bring in light and open to outdoor space, installed level and square so they glide freely and seal against drafts and driven rain.
Egress and basement windows
Enlarging or replacing basement windows to meet building code egress requirements for bedrooms, adding safe exits, natural light, and ventilation to finished lower levels.
Custom and specialty shapes
Bay, bow, casement, awning, and architectural shapes made to fit unusual openings, matching your home's style while upgrading glass and frame performance across the whole envelope.
Signs you need a windows & doors pro
Drafts and cold spots
Feeling air movement near closed windows or doors, or noticing rooms that stay cold no matter the thermostat, means the seals and weatherstripping have failed and your envelope is leaking energy.
Condensation between panes
Fog or moisture trapped between the glass layers means the sealed unit has failed and its insulating gas has escaped, so the window no longer performs and the glass should be replaced.
Difficult operation and drafty doors
Windows that stick or will not stay open, and doors that no longer latch cleanly or let daylight through the gaps, point to warping, rot, or settling that new units and proper installation resolve.
Rising energy bills and outside noise
Climbing heating and cooling costs alongside more street noise indoors both signal that old single or failed double glazing is no longer keeping conditioned air in or weather out.
What drives windows & doors cost
See the full cost guide →Full-frame versus insert install
Full-frame replacement costs more because it involves complete removal, structural inspection, re-flashing, and new trim, while insert replacement into sound frames is faster and less invasive.
Frame material and glazing
Vinyl, fibreglass, and wood frames differ in price and performance, and moving from double to triple-pane or adding low-emissivity coatings and gas fills raises both cost and efficiency.
Size, shape, and quantity
Large picture windows, custom shapes like bays and bows, and specialty doors cost more per opening, while replacing many units at once spreads mobilization and labour across the project.
Structural and finishing work
Hidden rot, rough opening repairs, enlarging openings for egress, and interior or exterior trim and drywall finishing add to the total when the surrounding structure needs attention.
Top Windows & Doors Contractors
View All
Concord, Ontario
Toronto's trusted renovation experts since 2009, kitchens, baths, basements & full home remodels across the GTA.
Calgary, Alberta
Calgary roofing specialists offering roof leak repair and metal roofing installation.
Windows doors in Canada
Across Canada, windows doors needs vary from one province to the next. With long winters across much of the country, work in Canada has to account for frost heave, ice and the swing between deep cold and summer heat.
Common windows doors work ranges from insert or retrofit replacement to patio and garden doors. Provincial building codes and local permit rules differ across the country, which is exactly where a nearby contractor earns their keep.
Use NeedReno to reach windows doors contractors in your province, get quotes in Canadian dollars, and hire locally with Canadian spelling and standards.
How to choose a windows & doors contractor
For windows and doors, the credential to look for on the product is the ENERGY STAR certification for your climate zone, since Canada divides the country into zones and a window ideal for a mild coast may be underspec'd for the prairies. Well-made units are tested to the CSA A440 and NAFS North American Fenestration Standard for air, water, and structural performance, so ask what ratings the units carry. On the installation side, the Window Wise program, backed by Fenestration Canada, certifies both the installer and the product and provides third-party inspection plus an extended warranty, which is a strong signal of a contractor who installs to a recognized standard.
Verify that the company carries commercial general liability insurance and workers compensation coverage through WSIB or your provincial board, and that they provide a clear written contract separating the manufacturer's product warranty from their own labour and installation warranty. Ask specifically how they flash and seal each opening for water management, since that hidden detail determines whether your walls stay dry. Review recent local references, confirm they handle disposal of the old units and any required permits, and be wary of high-pressure sales tactics or quotes that seem to price only the glass while glossing over the installation quality that makes the real difference.
What to expect from a windows & doors project
In-home consultation and measuring
The installer assesses the condition of each opening, discusses full-frame versus insert options, recommends frame materials and glazing for your climate, and takes precise measurements for custom units.
Ordering and scheduling
Custom windows and doors are manufactured to your exact openings, which takes several weeks, after which installation is scheduled and any required building permits are arranged.
Removal and opening prep
Old units are removed carefully, the rough opening is inspected for rot or damage, repairs are made as needed, and the opening is prepared with proper flashing and a sloped sill for drainage.
Installation and sealing
New units are set level, plumb, and square, shimmed and fastened, then sealed against air and water with membranes and low-expansion foam so the assembly performs as a weathertight system.
Trim, finishing, and cleanup
Interior and exterior trim is installed, caulking is finished, operation and locks are tested, old materials are hauled away, and the installer reviews warranty and care details with you.
Windows & Doors: frequently asked questions
How much does window replacement cost?
Cost per window depends on size, frame material, glazing, and whether you choose full-frame or insert installation. Custom shapes and premium triple-pane units cost more, while replacing several standard windows at once lowers the per-unit price. Because hidden rot or opening repairs can change the scope, the most reliable number comes from an in-home assessment where the installer measures each opening and inspects the surrounding structure.
Should I choose full-frame or insert window replacement?
Full-frame replacement removes everything to the rough opening, letting the installer inspect for rot, re-flash the opening, and correct any water issues, which is best when frames are damaged or drafty. Insert replacement fits new units into sound existing frames, costs less, and preserves trim, but it keeps whatever is behind the old frame. If your existing frames are solid and dry, inserts make sense; otherwise full-frame is the safer choice.
How long do replacement windows last?
Quality vinyl and fibreglass windows commonly last 20 to 40 years, with fibreglass and well-maintained wood at the longer end. The sealed glass unit that holds insulating gas is often the first thing to fail, sometimes within 15 to 20 years, showing up as fog between the panes. Good installation extends the life of any window by keeping water out of the surrounding structure, which is why fitting quality matters as much as the unit.
What is the best time of year to replace windows in Canada?
Windows and doors can be installed year-round, and installers work through winter by removing and replacing one opening at a time to limit heat loss. Spring and fall are popular for comfortable working conditions, which can mean longer lead times. Winter installation is entirely feasible and sometimes more available. What matters most is a careful installer who seals each opening properly regardless of the season.
Are triple-pane windows worth it in Canada?
In most of Canada's colder climate zones, triple-pane windows improve comfort by reducing cold-glass drafts and condensation, and they dampen outside noise noticeably. They cost more than double-pane, so the energy payback varies with your climate and heating costs. For northern and prairie regions the comfort and efficiency gains usually justify the upgrade, while in milder coastal areas a high-quality double-pane with low-emissivity coating may be enough.
Do I need a permit to replace windows or doors?
Like-for-like replacement often does not require a permit, but changing the size of an opening, adding a new window or door, or creating a basement egress window usually does, because it affects the structure and safety code. Requirements vary by municipality. A professional installer knows the local rules and typically handles any needed permits as part of the job, so ask during your consultation whether your project triggers one.
Ready to Start Your Windows & Doors Project?
Tell us about your project and we'll connect you with verified Windows & Doors professionals near you, for free.