HVAC Contractors
Find verified HVAC professionals near you and get free quotes.
3
Contractors Available
2
Projects This Month
Free
For Homeowners
About hvac services
HVAC stands for heating, ventilation and air conditioning, the combined systems responsible for your home's comfort and air quality in every season. In Canada that usually means a furnace or heat pump for heating, a central air conditioner or the same heat pump for cooling, and the ductwork, ventilation and filtration that move and clean the air. These systems are among the hardest working and most expensive in your home, and because they burn fuel, move refrigerant and consume a large share of your energy bill, they are also the ones where professional installation and maintenance matter most.
Most homeowners only think about HVAC when something goes wrong: no heat on a cold morning, an air conditioner blowing warm, uneven temperatures between rooms, or an energy bill that keeps climbing. A qualified HVAC contractor diagnoses whether you need a repair, a tune-up or a full system replacement, and helps you weigh options such as a high-efficiency furnace, a cold-climate heat pump, or a dual-fuel setup that switches between electric and gas depending on outdoor temperature. The right advice here has a big impact on both your comfort and your operating costs over the fifteen-plus years a system typically lasts.
There is also a strong efficiency and rebate story in Canadian HVAC right now. Cold-climate heat pumps have improved enough to heat homes through hard winters while providing summer cooling from a single unit, and various federal and provincial programs periodically offer rebates for upgrading to high-efficiency equipment. A knowledgeable contractor sizes equipment with a proper heat-loss calculation rather than guesswork, so you are not stuck with an oversized system that short-cycles or an undersized one that never keeps up. Correct sizing, sealed ductwork and good airflow often matter more than the badge on the box.
HVAC services we cover
Furnace repair and replacement
Diagnosing and fixing no-heat calls, failed igniters, blower motors and control boards, or replacing an aging, inefficient furnace with a high-efficiency model sized to your home with a proper heat-loss calculation.
Air conditioner service and install
Repairing weak cooling, refrigerant issues and failed compressors, or installing a new central air conditioner. Refrigerant handling must be done by a certified technician under federal environmental rules.
Heat pump installation
Supplying and installing cold-climate air-source or ductless mini-split heat pumps that both heat and cool from one system, often paired with existing furnaces in a dual-fuel setup for the coldest days.
Preventive maintenance tune-ups
Seasonal inspections that clean components, check gas pressure and refrigerant charge, test safety controls and replace filters, catching small problems before they become no-heat or no-cool emergencies.
Ductwork and airflow
Sealing leaky ducts, correcting undersized returns and balancing airflow so rooms heat and cool evenly. Poor ductwork wastes energy and undermines even the best equipment.
Indoor air quality and ventilation
Installing HRVs and ERVs, high-efficiency filtration, humidifiers and fresh-air ventilation to manage humidity, allergens and the stale air common in tightly sealed modern homes.
Signs you need a hvac pro
Uneven temperatures room to room
Some rooms stay cold while others roast, or upstairs never matches downstairs. This usually points to airflow, ductwork or sizing problems that a contractor can diagnose and balance.
Rising bills or short cycling
Climbing energy costs, or a system that switches on and off in rapid bursts, signals declining efficiency, an oversized unit, or a component starting to fail and working harder than it should.
Strange noises or smells
Banging, grinding or a persistent burning or musty smell when the system runs are warning signs. A gas or rotten-egg odour is an emergency; leave and call your utility and a technician immediately.
Aging equipment and frequent repairs
A furnace or air conditioner past its expected service life that needs repeated repairs is often cheaper to replace, especially given how much more efficient current equipment is.
What drives hvac cost
See the full cost guide →Equipment type and efficiency
A basic furnace costs less than a high-efficiency model or a cold-climate heat pump, and system capacity matters too. Higher efficiency ratings cost more upfront but lower operating costs and may qualify for rebates.
Home size and load calculation
Properly sizing equipment to your home's heat loss and gain determines capacity, which drives price. Larger or poorly insulated homes need more capacity, while an honest contractor sizes to the actual load, not the biggest unit.
Ductwork and installation complexity
Homes needing new or modified ductwork, electrical upgrades for a heat pump, or difficult equipment access cost more to install than a straightforward like-for-like furnace swap in an accessible mechanical room.
Repair versus replacement
A single repair is cheaper today, but repeated fixes on old equipment add up. Age, efficiency, refrigerant type and the cost of the failed part all factor into whether replacement is the smarter spend.
Top HVAC Contractors
View All
Thornhill, Ontario
Commercial, condo & residential HVAC experts across the GTA, 15+ years, TSSA-certified. Furnaces, AC, heat pumps, rooftop & building systems.
Concord, Ontario
Toronto's trusted renovation experts since 2009, kitchens, baths, basements & full home remodels across the GTA.
Edmonton, Alberta
Local electrical in Edmonton, specializing in lighting and fixtures and safety inspections and troubleshooting.
Hvac in Canada
Across Canada, hvac needs vary from one province to the next. Canadian winters put real stress on a home, so materials and installation here are chosen to handle frost, snow load and freeze-thaw cycles.
Typical jobs include ductwork and airflow and furnace repair and replacement. Provincial building codes and local permit rules differ across the country, which is exactly where a nearby contractor earns their keep.
Use NeedReno to reach hvac contractors in your province, get quotes in Canadian dollars, and hire locally with Canadian spelling and standards.
How to choose a hvac contractor
HVAC is one of the most heavily regulated home trades in Canada, and for good reason: it involves combustion, fuel gas and refrigerants that are dangerous when mishandled. Any work on natural gas or propane equipment must be performed by a licensed gas fitter, and technicians handling refrigerant must hold Ozone Depletion Prevention certification under federal environmental regulations, along with trade qualification such as a Refrigeration and Air Conditioning Mechanic or provincial HVAC licence. In several provinces, gas work also requires a TSSA or equivalent registration. Ask to see these credentials, and confirm the company carries general liability insurance and workers' compensation coverage before anyone touches your equipment.
Beyond licensing, insist on a contractor who does the fundamentals right. A proper installation starts with a heat-loss and heat-gain calculation to size the equipment, not a rule of thumb based on square footage alone, because an oversized system short-cycles and an undersized one never keeps up. Ask whether they pull the required permits and arrange inspection, how they handle warranty registration, and whether they offer a maintenance plan. Get multiple written quotes that specify the exact make, model, efficiency rating and included ductwork or electrical work, so you are comparing equal scopes. A contractor who explains their sizing and answers efficiency questions clearly is worth more than the cheapest bid on unspecified equipment.
What to expect from a hvac project
Assessment and load calculation
The contractor inspects your home, ductwork and existing equipment and performs a heat-loss and gain calculation to determine the correct capacity, rather than simply matching the size of your old unit.
System recommendation and quote
You review options such as a high-efficiency furnace, heat pump or dual-fuel system, with clear specs on model, efficiency, applicable rebates and a written, itemized price for equipment and installation.
Permits and scheduling
The contractor pulls required gas, electrical and mechanical permits, orders equipment, and schedules the install, typically completing a standard changeout in a day with minimal disruption.
Installation and commissioning
Old equipment is removed and the new system installed, connected and any ductwork sealed. The technician then commissions it, checking gas pressure, refrigerant charge, airflow and safety controls.
Inspection and maintenance plan
A municipal or authority inspection confirms the work meets code, warranty is registered, and you are set up with filter and seasonal maintenance guidance to protect efficiency and equipment life.
HVAC: frequently asked questions
What does HVAC stand for?
HVAC stands for heating, ventilation and air conditioning. It refers to the combined systems that control temperature, air movement and air quality in a building. In a typical Canadian home that includes a furnace or heat pump for heat, an air conditioner or heat pump for cooling, and the ductwork, filtration and ventilation that circulate and clean the air. These systems are often designed, installed and serviced together as one integrated whole.
How often should HVAC be serviced?
As a general rule, have heating equipment serviced once a year, ideally in fall before the heating season, and cooling equipment checked in spring. Filters should be inspected monthly and changed every one to three months depending on the type and household. Regular maintenance keeps efficiency up, catches small problems before they become emergencies, and is often required to keep manufacturer warranties valid.
How long does an HVAC system last?
A well-maintained furnace typically lasts around fifteen to twenty years, a central air conditioner about fifteen, and heat pumps roughly a similar range. Lifespan depends heavily on maintenance, installation quality and how hard the system runs in your climate. As equipment approaches the end of its life and repairs become frequent, replacing it often makes sense given the efficiency gains of newer systems.
Is a heat pump worth it in Canada?
For much of Canada, a cold-climate heat pump is worth considering because it provides both heating and cooling from one system and runs efficiently well below freezing. Many homeowners pair one with an existing gas furnace in a dual-fuel setup that switches to gas on the coldest days. Rebates can offset the upfront cost. A contractor should model your climate and home before recommending one.
Should I repair or replace my furnace?
Consider the age, the cost of the repair relative to a new unit, and how efficient the current furnace is. A minor fix on a furnace under about ten years old usually makes sense. If it is near the end of its life, needs an expensive part, or repairs are becoming frequent, replacing it with a high-efficiency model often pays off in lower bills and reliability.
Why are some rooms hotter or colder than others?
Uneven temperatures usually come from airflow and ductwork issues, an improperly sized system, poor insulation, or closed and blocked vents. Long duct runs to far rooms, undersized returns and leaky ducts all cause it. An HVAC contractor can diagnose the cause, seal and balance the ductwork, and in some cases add zoning or a ductless unit to even things out.
Ready to Start Your HVAC Project?
Tell us about your project and we'll connect you with verified HVAC professionals near you, for free.